设为首页 | 添加收藏 | 我的商务办公室 | 繁體中文 | English
美国国际规范协会(ICC)ACCEPTANCE CRITERIA FOR THERMOPLASTIC COMPOSITE LUMBER PRODUCTS
来源: 作者: 发布日期:2014-08-08 阅读次数:988 评论数:0 收藏 打印 
美国国际规范协会(ICC)ACCEPTANCE CRITERIA FOR THERMOPLASTIC COMPOSITE LUMBER PRODUCTS

1.0 INTRODUCTION

1.1 Purpose: The purpose of this acceptance criteria is  to establish requirements for solid cross-sectional thermoplastic composite lumber (TCL) products to be

recognized in an ICC Evaluation Service, Inc. (ICC-ES), evaluation report under the 2003 International Building Code® (IBC), the 2003 International Residential Code®

(IRC), the BOCA® National Building Code/1999 (BNBC), the 1999 Standard Building Code© (SBC) and the 1997 Uniform Building Code™ (UBC). Bases of recognition are Section R 104.11 of the IBC, Section R104.11 of the IRC, Section 106.4 of the BNBC, Section 103.7 of the SBC and Section R104.2.8 of the UBC. The reason for development of this criteria is to provide a guideline for the evaluation of materials identified in Section 1.2 of this criteria for use in deckboards and guardrails, since the codes do not contain information on the materials.

1.2 Scope: Solid rectangular cross-sectional thermoplastic composite lumber products are recognized for use as a flooring, guardrail (guard), or nonstructural trim

component for exterior balconies, porches, decks, and other exterior walking surfaces.

1.3 Reference Documents:

1.3.1 2003 International Building Code®, International Code Council.

1.3.2 2003 International Residential Code®, International Code Council.

1.3.3 BOCA® National Building Code/1999 (BNBC).

1.3.4 1999 Standard Building Code© (SBC).

1.3.5 1997 Uniform Building Code™ (UBC).

1.3.6 ICC-ES Acceptance Criteria for Quality Control Manuals (AC10).

1.3.7 ICC-ES Acceptance Criteria for Structural Composite Lumber (AC47).

1.3.8 ICC-ES Acceptance Criteria for Test Reports and Product Sampling (AC85).

1.3.9 ASTM D 1413-99, Test Method for Wood Preservatives by Laboratory Soil-block Cultures, ASTM International.

1.3.10 ASTM D 2565-99, Practice for Operating Xenon Arc-type Light-exposure Apparatus With or Without Water for Exposure of Plastics, ASTM International.

1.3.11 ASTM D 2915-98, Practice for Evaluating Allowable Properties for Grades of Structural Lumber, ASTM International.

1.3.12 ASTM D 2990-95, Test Methods for Tensile, Compressive, and Flexural Creep and Creep-rupture of Plastics, ASTM International.

1.3.13 ASTM D 3345-74 (1999), Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites, ASTM International.

1.3.14 ASTM D 5456-99a, Specification for Evaluation of Structural Composite Lumber Products, ASTM International.

1.3.15 ASTM E 4-99, Practices for Force Verification of Testing Machines, ASTM International.

1.3.16 ASTM E 84-01, Test Methods for Surface Burning Characteristics of Building Materials, ASTM International.

1.3.17 ASTM D 6109-97, Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber, ASTM International.

1.3.18 ASTM D 7032-04, Standard Specification for Establishing Performance Ratings for Wood-Plastic  Composite Deck Boards and Guardrail Systems (Guards or

 Handrails), ASTM International.

责任编辑:王艳艳

发表评论

共0条 [查看全部]
 
好评
 
0% 0
中评
 
0% 0
差评
 
0% 0
 
好评 中评 差评